|
少层Ti3C2Tx基复合材料的制备及其光催化性能 |
Preparation and photocatalytic performance of few-layer Ti3C2Tx-based composites |
投稿时间:2019-02-24 |
DOI: |
中文关键词: Ti3C2Tx Ti3AlC2 TiO2/ Ti3C2Tx复合材料 锐钛矿型TiO2 二甲基亚砜 溶剂热法 光催化性能 |
英文关键词: Ti3C2Tx Ti3AlC2 TiO2/ Ti3C2Tx composite anatase TiO2 dimethyl surfoxide solvothermal method photocatalytic performance |
基金项目:国家自然科学基金资助项目(51472186,1). |
作者 | 单位 | E-mail | 严康 | 武汉科技大学煤转化与新型炭材料湖北省重点实验室,湖北 武汉,430081 | 690659858@qq.com | 关云锋 | 武汉科技大学煤转化与新型炭材料湖北省重点实验室,湖北 武汉,430081 | | 丛野 | 武汉科技大学煤转化与新型炭材料湖北省重点实验室,湖北 武汉,430081 武汉科技大学省部共建耐火材料与冶金国家重点实验室,湖北 武汉,430081 | | 徐畑祥 | 武汉科技大学煤转化与新型炭材料湖北省重点实验室,湖北 武汉,430081 | | 朱辉 | 武汉科技大学煤转化与新型炭材料湖北省重点实验室,湖北 武汉,430081 武汉科技大学省部共建耐火材料与冶金国家重点实验室,湖北 武汉,430081 | | 李轩科 | 武汉科技大学煤转化与新型炭材料湖北省重点实验室,湖北 武汉,430081 武汉科技大学省部共建耐火材料与冶金国家重点实验室,湖北 武汉,430081 | |
|
摘要点击次数: 3862 |
全文下载次数: 2494 |
中文摘要: |
通过刻蚀Ti3AlC2前驱体制得少层Ti3C2Tx(DL-Ti3C2Tx),以二甲基亚砜为反应溶剂采用溶剂热法控制氧化DL-Ti3C2Tx制备了TiO2/DL-Ti3C2Tx复合材料。借助XRD、SEM、TEM、Raman等对相关样品的物相结构及微观形貌进行表征,并通过罗丹明B的光降解实验评价了所制复合材料的光催化性能。结果表明,复合材料DL-Ti3C2Tx片层的表面形成了均匀致密的锐钛矿型TiO2纳米颗粒,通过控制溶剂热温度能够调控复合材料中DL-Ti3C2Tx和TiO2的相对含量,并且当溶剂热温度为100 ℃时,所制TiO2/DL-Ti3C2Tx复合材料光催化性能最佳。 |
英文摘要: |
Delaminated Ti3C2Tx with few layers (DL-Ti3C2Tx) was prepared through etching Ti3AlC2 precursor, and then solvothermal method was adopted to carry TiO2/DL-Ti3C2Tx composites by using dimethyl sulfoxide as the reaction solvent for controlled oxidation of DL-Ti3C2Tx.The phase structure and morphology of the samples were characterized by XRD,SEM,TEM,Raman and so on,and the photocatalytic performance of as-prepared composites was evaluated by means of photocatalytic degradation of rhodamine B. The results show that uniform and dense anatase TiO2 nanoparticles form on the surface of DL-Ti3C2Tx in composites, and the relative content of TiO2 and DL-Ti3C2Tx can be adjusted by controlling the solvothermal temperature. What’s more, the TiO2/DL-Ti3C2Tx composite prepared at the solvothermal temperature of 100 ℃ exhibits the optimum photocatalytic performance. |
查看全文
查看/发表评论 下载PDF阅读器 |
关闭 |
|
|
|