Welcome to WUST,You are using IPv6 to access this website!
文章摘要
喷雾重叠率对带钢冷却效果的影响
Influence of spray overlap ratio on the cooling effect of strip steel
投稿时间:2019-01-12  
DOI:
中文关键词: 带钢  气雾冷却  喷雾重叠率  液滴分布  温度分布  冷却速度  数值模拟
英文关键词: strip steel  spray cooling  spray overlap ratio  droplet distribution  temperature distribution  cooling rate  numerical simulation
基金项目:国家自然科学基金资助项目(51405352);武汉科技大学冶金装备及其控制教育部重点实验室开放基金资助项目(2013A01).
作者单位E-mail
王炯 1. 武汉科技大学冶金装备及其控制教育部重点实验室,湖北 武汉,430081
2. 武汉科技大学机械传动与制造工程湖北省重点实验室,湖北 武汉,430081 
1029676802@qq.com 
邹光明 1. 武汉科技大学冶金装备及其控制教育部重点实验室,湖北 武汉,430081
2. 武汉科技大学机械传动与制造工程湖北省重点实验室,湖北 武汉,430081 
 
王兴东 1. 武汉科技大学冶金装备及其控制教育部重点实验室,湖北 武汉,430081
2. 武汉科技大学机械传动与制造工程湖北省重点实验室,湖北 武汉,430081 
 
汪朝晖 1. 武汉科技大学冶金装备及其控制教育部重点实验室,湖北 武汉,430081
2. 武汉科技大学机械传动与制造工程湖北省重点实验室,湖北 武汉,430081 
 
孔建益 1. 武汉科技大学冶金装备及其控制教育部重点实验室,湖北 武汉,430081
2. 武汉科技大学机械传动与制造工程湖北省重点实验室,湖北 武汉,430081 
 
摘要点击次数: 4103
全文下载次数: 2249
中文摘要:
      本文建立了双喷嘴气雾冷却系统的物理和数学模型,在固定单个喷嘴流量、压力、雾化角和喷嘴喷射距离的条件下,利用FLUENT软件对喷雾重叠率分别为0、25%、50%和75%时,雾化场中液滴分布、液滴速度以及带钢表面温度分布、带钢冷却速度进行仿真计算。数值模拟结果表明,当喷雾重叠率为25%时,雾化场内液滴的位置分布、带钢表面液滴的速度分布以及带钢表面的温度分布最为均匀,带钢冷却效果最佳;但与其他喷雾系统的特性参数相比,喷雾重叠率对带钢的冷却速度影响不大。
英文摘要:
      In this papar, the physical and mathematical models of double-nozzle spray cooling system were established. Under the conditions of fixed single nozzle flow, inlet pressure, atomization angle and nozzle spray distance, the droplet distribution in the atomization field, droplet velocity, temperature distribution on the surface of strip as well as the cooling rate of strip at the spray overlap ratio of 0,5%, 50% and 75%, respectively, were simulated and calculated by using FLUENT software. The numerical simulation results show that when the spray overlap ratio is 25%, the position distribution of droplets in the atomization field, the velocity distribution of droplets as well as the temperature distribution on the surface of strip turn out to be the most uniform, along with the optimal cooling effect of the strip steel. Nevertheless, the spray overlap ratio has slight influence on the cooling rate of strip compared with other factors.
查看全文   查看/发表评论  下载PDF阅读器
关闭