Welcome to WUST,You are using IPv6 to access this website!
文章摘要
Cr元素对Al-Ni合金凝固组织及显微硬度的影响
Effect of Cr on solidification structure and microhardness of Al-Ni alloy
投稿时间:2017-05-11  
DOI:
中文关键词: Al-Ni合金  Cr  微合金化  凝固组织  显微硬度
英文关键词: Al-Ni alloy  Cr  microalloying  solidification structure  microhardness
基金项目:国家自然科学基金资助项目(11574242).
作者单位E-mail
华称文 1. 武汉科技大学材料与冶金学院,湖北 武汉,430081
2.武汉科技大学省部共建耐火材料与冶金国家重点实验室,湖北 武汉,430081 
738295639@qq.com 
甘章华 1. 武汉科技大学材料与冶金学院,湖北 武汉,430081
2.武汉科技大学省部共建耐火材料与冶金国家重点实验室,湖北 武汉,430081 
 
倪明 1. 武汉科技大学材料与冶金学院,湖北 武汉,430081
2.武汉科技大学省部共建耐火材料与冶金国家重点实验室,湖北 武汉,430081 
 
刘静 1. 武汉科技大学材料与冶金学院,湖北 武汉,430081
2.武汉科技大学省部共建耐火材料与冶金国家重点实验室,湖北 武汉,430081 
 
卢志红 1. 武汉科技大学材料与冶金学院,湖北 武汉,430081
2.武汉科技大学省部共建耐火材料与冶金国家重点实验室,湖北 武汉,430081 
 
摘要点击次数: 5050
全文下载次数: 3313
中文摘要:
      采用光学显微镜(OM)、扫描电镜(SEM)、能谱分析(EDS)、X射线衍射分析(XRD) 和硬度测试等手段研究Cr元素对Al-Ni合金的相组成、凝固组织及显微硬度的影响。结果表明,AlNi2.5Crx合金凝固组织主要为α(Al)相和共晶组织Al-Al3Ni;Cr的添加细化了合金凝固组织,当Cr的原子分数为0.2%时,α(Al)细化效果最佳,当Cr的原子分数为0.3%时,Al3Ni细化效果最佳;随着Cr含量的增加,合金硬度得到提高,当Cr的原子分数为0.5%时,合金硬度达到最大值51.2HV,这是固溶强化、细晶强化和晶格畸变共同作用的结果。
英文摘要:
      The effect of Cr on the phase composition, solidification structure and microhardness of Al-Ni alloys was studied by OM, SEM, EDS, XRD and hardness test.The results show that the phase composition of AlNi2.5Crx alloys mainly includes α(Al) phase and Al-Al3Ni eutectic. Solidifica-tion structures of the alloys are obviously refined by adding Cr. The average grain sizes ofα(Al)phase and Al3Ni phase reach the minimum when Cr content is 0.2 at.% and 0.3 at.% respectively. With the increase of Cr content,the microhardness of the alloys rises. When Cr content is 0.5 at.%, the alloy has the maximal microhardness of 51.2HV.This is mainly due to the combined action of solid solution strengthening, fine-grain strengthening and lattice distortion.
查看全文   查看/发表评论  下载PDF阅读器
关闭