|
超临界二甲醚喷雾特性的试验研究 |
An experimental study of supercritical DME spray characteristics |
投稿时间:2016-10-18 |
DOI: |
中文关键词: 二甲醚 超临界 跨临界 定容容器 喷雾特性 |
英文关键词: DME supercritical transcritical constant volume vessel spray characteristics |
基金项目:湖北省自然科学基金重点项目(2015CFA113); 汽车动力传动与电子控制湖北省重点实验室(湖北汽车工业学院)开放基金项目(ZDK201212); “汽车零部件技术湖北省协同创新中心”研究平台资助项目;“汽车节能技术湖北省协同创新中心(培育)”研究平台资助项目. |
作者 | 单位 | E-mail | 周昃 | 武汉科技大学汽车与交通工程学院,湖北 武汉,430081 茨城大学理工学研究科,日本茨城 日立,3168511 | zebestmail@qq.com | 张光德 | 武汉科技大学汽车与交通工程学院,湖北 武汉,430081 | | 宋巍 | 武汉科技大学汽车与交通工程学院,湖北 武汉,430081 | | 大越淑央 | 茨城大学理工学研究科,日本茨城 日立,3168511 | | 菊地真辅 | 茨城大学理工学研究科,日本茨城 日立,3168511 | | 金野满 | 茨城大学理工学研究科,日本茨城 日立,3168511 | |
|
摘要点击次数: 5814 |
全文下载次数: 2515 |
中文摘要: |
为研究超临界二甲醚的喷雾特性,在定容容器内模拟涡轮增压发动机气缸内的实际环境,使用高速摄像机对超临界二甲醚喷雾的外形轮廓及发展过程进行观察,并将其与跨临界二甲醚喷雾进行对比。结果表明,二甲醚喷雾在发展过程中发生了明显的卷状分裂,并且观察不到二次分裂现象;超临界二甲醚喷雾的外形轮廓及贯穿距离与跨临界喷雾并未有明显差别,但由于超临界二甲醚在涡轮增压环境中的扩散速率更快,因此其喷雾锥角更大,喷雾核心区的长度更短;两种喷射状态下的二甲醚在喷入定容容器后,其喷雾尖端的推进速率都会先急剧增大,然后在达到峰值后又急剧减小,最后在低速段保持相对稳定。 |
英文摘要: |
To study the spray characteristics of supercritical dimethyl ether (DME), the cylinder temperature and pressure of turbocharged engines were simulated in a constant volume vessel and DME spray was observed with a high-speed camera. The shape and development process of supercritical DME spray were compared with those at temperatures below and above the critical point. It is found that DME spray shows a clear roll splitting in the development process and yet no secondary splitting. Outer shape and penetration length of supercritical DME spray are almost the same as those of transcritical DME spray; however, since supercritical DME spray diffuses faster than transcritical DME spray, the former has a slightly wider spray angle and shorter length of core spray area. When DME is injected into the constant volume vessel, the tip velocity of spray under the two injection conditions increases to the peak at first, then decreases sharply, and finally remains stable in the low velocity area. |
查看全文
查看/发表评论 下载PDF阅读器 |
关闭 |
|
|
|